Glass Printer Bed 235x235x3.8mm Borosilicate Glass 3D Printer Glass Print Platforms for Ender 5/Ender 3/Ender 3 Pro
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Purchase options and add-ons
- 【Borosilicate Glass】Based on 100,000 experiment report,this material has Ultra-low thermal expansion,heat resistant and high temperature shock resistance,far better than tempered glass.So borosilicate glass is the best choice for 3d printer.
- 【Worked Perfectly】This Printer Glass bed is amazingly flat.Smooth flat surface improves the quality of your 3D printing, for consistent results.Thick 3.8mm glass plate will not warp or bend under heat.
- 【Easy to Clean】Just wash it off with water, clean with glass print bed cleaner, reapply a thin layer 3d printing solid glue and enjoy.No need extra clips because of its own material and thickness.It won't take up build area.
- 【High Quality】 Square printer glass are safe and easy to handle.All edges have a nice smooth round over and there are no chips or scratches.Fits for the Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5 and CR-6 SE, CR-20, CR-20 Pro,DISWAY01.
- 【18 Months Warranty】100% Dcreate Genuine Brand New - Original packaging, premium quality. 100% hassle-free replacement guarantee within 18 months warranty and replacement for quality issue.
Frequently bought together
Similar items that may ship from close to you
- Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mmFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Tuesday, Apr 2
- Mefine Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235x235x4mmAmazon's Choicein 3D Printer PlatformsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Tuesday, Apr 2
- Comgrow 2PCS Ender 3 Pro Glass Bed, Upgraded Tempered Glass Plate with Bed Clips, Ender 3 Build Plate 235x235x4mm for Creality Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/3 S1/3 S1 Pro/5 ProFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Tuesday, Apr 2
- IMPRESA 2 Pack 3D Printer Glass Print Bed for Ender 3/5 / Pro / 3X - 235 x 235 x 4 mm - 8 Printer Bed Clips Included- Tempered Glass Replacement/Upgrade for Borosilicate Creality Platform-3D PrintingFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Tuesday, Apr 2
- Creality Official Ender 3 Glass Bed Upgraded, High Hardness Durable Glass Platform for 3D Printer, Tempered Glass Build Plate for Ender 3 Pro, Ender 5, Ender 5 Pro, Ender 3 V2, 235x235×4mmFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Tuesday, Apr 2
- 3D Printer Glass Bed Upgraded, Borosilicate Glass Plate for Creality Ender 3 Pro Ender 5 Pro 235x235x3mm Build Surface Replacement with 4 Glass ClipsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Tuesday, Apr 2Only 12 left in stock - order soon.
Product details
- Is Discontinued By Manufacturer : No
- Product Dimensions : 9.25 x 9.25 x 0.15 inches; 1.1 Pounds
- Item model number : Glass Print bed
- Date First Available : October 19, 2018
- Manufacturer : DCSW
- ASIN : B07JKGNB6W
- Country of Origin : China
- Best Sellers Rank: #106,974 in Industrial & Scientific (See Top 100 in Industrial & Scientific)
- #1,455 in 3D Printer Accessories
- Customer Reviews:
Product Description
Welcome to DCSW 3D printer store,Hope you have a great shopping experience!Any questions,feel free to contact we customer service,we will help you within 24 hrs!
Glass Print bed Advantages:
Glass Print bed is a universal print surface for 3D Printing. Almost all types of filament will print toglass in one way or another. Just place the Glass Print bed on your print board and clip it in place!To print with PLA or ABS , lightly spray the surface of the glass with 3d printing special solid glue,then install the Glass Print bed with glass clip. This glass has been specially ordered and modified for use in 3D Printers.
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations.
Features:
1.Resistant to thermal shock compared to regular glass.
2.Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
3.Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.
Note:
1.The glass can be used normally at 520 degree temperature.
2.You need to adjust the Z axis limit switch up and down when installing.
3.Apply some 3d printing solid glue on the glass surface on before printing.
4. The Glass Print Bed's thickness of 4.0mm is within the normal range.
From the brand
-
Sovol was founded in Shenzhen China, 2018. In the past 5 years, we have independently developed several 3D printers and many best-selling accessories which are exported to five continents. We have more than 120,000 fans around the world.
As a growing brand, Sovol has a complete production line, an experienced R&D and after-sales team, and aims to provide global makers with one-stop 3D printing experience and services.
-
-
Looking for specific info?
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the quality, flatness, fit and ease of cleaning of the cutting tools. For example, they mention it works great with their printer, the glass is nice and flat and it comes right off with minimal effort. That said, they're satisfied with appearance, and print quality. That being said, opinions are mixed on adhesion and level.
AI-generated from the text of customer reviews
Customers like the quality of the cutting tools. They say it works well, is packaged well, and is of high quality. Some mention that the bed is very good and rides above any small imperfections on the underlying heated bed. Overall, customers are satisfied with the quality and functionality of the product.
"...I find that it works very well, is relatively trouble-free and economical." Read more
"...The bed is relatively thick, and it rides above any small imperfections on the underlying heated bed surface...." Read more
"...I had some issues at first with warping, but solved the problem with a thicker application of aquanet and a slightly higher bed temp...." Read more
"...using this for at least a year on my Geeetech A20M 3D printer, it works great, no issues, as long as you level your printer before use it works as..." Read more
Customers like the flatness of the cutting tools. For example, they say it's a perfectly flat piece of glass, and easy to clean. Some mention that the glass surface is even and straight. Overall, customers are happy with the flat quality of the product and find it useful for 3D printing.
"There's not a lot to write here. Glass is flat, not warped like the metal beds of most printers, so there are no low or high spots...." Read more
"...Between the smooth, flat leveling of the glass, and the powerful adhesion of the PEI sheet, my Ender 3's printing experience has been transformed...." Read more
"...can tolerate high temperatures without warping and because they are very flat...." Read more
"...One time I printed a statue with a very broad flat base that I couldn't get off of the glass...." Read more
Customers find the cleaning of the cutting tools to be easy. They mention that the prints come right off with minimal effort after the bed cools down. Some say that the print is smooth and pops clean off the bed. Overall, most are satisfied with the ease of cleaning.
"...The glue removes easily with water, and the plate is ready to go again in a minute or two...." Read more
"...use unscented aquanet hairspray for adhesion and have had minimal issues removing prints...." Read more
"...Clings when hot, releases when cool.Super easy to clean, little windex and all the super fine bits of plastic that the scraper doesn't..." Read more
"...an unsupported print has also improved significantly, and the plate is easier to clean, no more solvents, just scrape it with a razor blade...." Read more
Customers are satisfied with the fit of the build plate. They mention that it is the correct size to fit their printer's bed, and the glass is the perfect size for the print bed.
"...The bed is a perfect fit for the print area, and a fantastic upgrade from the stock magnetic build plates...." Read more
"...Overall this bed fits my Ender 3 well and is a good surface to print on. Would likely buy again if I want another spare bed." Read more
"Fits great on the Ender 3 Pro, even keeping the magnetic coating on...." Read more
"This glass fits the print bed perfectly! All of the edges and corners are beveled leaving an excellent fit and finish on the Ender 3...." Read more
Customers are satisfied with the appearance of the glass bed. They mention that it has a nice shiny finish on the bottom, and that it looks and works great on an Ender 3.
"The glass plate is lot easier then any default plate. It looks really good and it doesn't have streaks from previous prints...." Read more
"Its the perfect piece of glass for my Ender3! A couple of items to note:1...." Read more
"Nice Glass but make sure you wash it with warm water and degreasing dish soap right out of the package...." Read more
"...time the print pops itself free as it cools and it has a nice shiny finish on the bottom because of the smooth glass." Read more
Customers like the print quality of the cutting tool. They mention that it greatly improves printing, and is better than the stock print surface. They also have great results printing PLA, ABS, and TPU on this bed. The glass makes it easier to level the bed, and it's a good combo for their prints using a variety of filament.
"...Prints start without complaint, and stay frozen in place the entire time." Read more
"...worried about uniformity across the entire glass, prints on the borosilicate glass excellent and no glue is needed so long as your Z axis is dialed..." Read more
"...Overall this bed fits my Ender 3 well and is a good surface to print on. Would likely buy again if I want another spare bed." Read more
"...to the build plate, and setting z offset of course, I had some really good prints, while it lasted...." Read more
Customers are mixed about the adhesion of the cutting tools. Some mention that it's okay, while others say that it was a little off. Some say that the PLA filament didn't stick well, while other customers say that they would no longer stick to the glass.
"...Between the smooth, flat leveling of the glass, and the powerful adhesion of the PEI sheet, my Ender 3's printing experience has been transformed...." Read more
"...the entire glass, prints on the borosilicate glass excellent and no glue is needed so long as your Z axis is dialed in correctly...." Read more
"...I gave up on using build surfaces for PETG, as the prints would bond so well that I destroyed the build surface trying to get the print off...." Read more
"...Clings when hot, releases when cool...." Read more
Customers are mixed about the level of the cutting tools. Some mention that the bed leveling and consistency is much better after this upgrade, and the glass itself is very level. However, others say that it has a dip in the middle and is impossible to level.
"...not warped like the metal beds of most printers, so there are no low or high spots...." Read more
"...With the glass bed installed, setting and maintaining the bed level is vastly improved...." Read more
"This print bed didn't work out for me. It was extremely hard to level the bed due to the sheer thickness of this, prints wouldn't stick if they took..." Read more
"...bed or the stock print surface, and it transmits heat better and more evenly...." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
I have been using this glass plate with the large purple Elmer's glue stick for a couple months. The prints stay attached to the bed and don't warp, and are pretty easy to remove. The glue removes easily with water, and the plate is ready to go again in a minute or two.
I tried a few different build surfaces, most worked well for small PLA prints, but larger prints warped and separated from the build surface. I gave up on using build surfaces for PETG, as the prints would bond so well that I destroyed the build surface trying to get the print off.
I am happy with the simple glass plate and glue stick. I find that it works very well, is relatively trouble-free and economical.
With the glass bed installed, setting and maintaining the bed level is vastly improved. The bed is relatively thick, and it rides above any small imperfections on the underlying heated bed surface. The glass itself is very level, providing a very consistent plane to print onto. The extra weight of the glass I view as a feature, as it seems to help dampen any small vibrations from the printer's use.
The bed was thoughtfully shipped and well protected. I'm very happy with the quality of the received product. I can't review the adhesive properties of the bed itself, as I paired it with a PEI sheet. The PEI sheet is absolutely magical when it comes to PLA adhesion. Between the smooth, flat leveling of the glass, and the powerful adhesion of the PEI sheet, my Ender 3's printing experience has been transformed. Prints start without complaint, and stay frozen in place the entire time.
Aquanet hair spray is what I saw everyone recommending and it works so flawlessly with this. Clings when hot, releases when cool.
Super easy to clean, little windex and all the super fine bits of plastic that the scraper doesn't want to pull up will come right off.
Can't imagine myself switching to anything else.
Top reviews from other countries
肉眼では反りなども無さそうだし。
しかし、残念ながらAnycubic Cobra2 Neoでは使用できませんでした。
透明なのでZ軸のセンサーが反応せずにノズルをグリグリと押し付けてしまいます。
220度に加熱されたノズルで、ヒートベッドが傾くくらい強く押し付けられてもガラスには傷が付いていないので強度はあると思います。
ヘッドに残っていたプラの食いつきも良かったので、使えないのが本当に残念です。
オートレベリング機能の付いたプリンタでは使えない可能性もあるのでご注意を。
A: Clean it with generic Glass cleaner and a microfibre cloth and,
B: Have the correct bed temperature.
Overall it works perfectly would definitely recommend it.
I use:
55 deg for PLA
60 deg for PLA+
73 deg for PET-G