Description
The MTX-R sidemount set is a super tough, rugged, high performance, go anywhere sidemount regulator configuration designed to meet the rigours of cold water and extreme sidemount diving. the MTX-R is highly reliable and also very easy to service out in the field which makes it an ideal choice for the expedition and exploration diver.
First Stages:
- Over balanced for superior performance
- Compact, environmentally sealed diaphragm system, completely eliminating the maintenance issues associated with silicone, oil or grease filling
- Recommended for frequent use in cold or contaminated water
- Environmental, over-moulded endcap & diaphragm that helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage.
- Double swivel hose for greater freedom of movement and comfort.
- 5 x 3/8″ UNF medium pressure ports & 2 x 7/16″ UNF high pressure ports
- The 5th 3/8″ UNF medium pressure port includes a protective bumper when not in use
- Forged first stage body with heat exchanging ribs for maximum thermal performance
- Angled HP ports for optimal hose routing and fitting transmitters
- Forged rotating turret with medium pressure ports in a parallel direction for improved hose orientation
- Tested for Octopus use – EN250A to 60 meters cold water
- Nitrox/Oxygen compatible
Second Stages:
- Simple to use with no dive controls, pre-settable cracking effort, or venturi control by an Apeks approved qualified technician
- High performance, pneumatically balanced lever operated poppet valve
- Large diver friendly self-flushing controllable purge button
- Front cover with over-moulded elastomer bumpers incorporates a formed chrome plated brass plate, improving durability of the demand valve
- Large protective elastomer bumpers on the side and on the top to protect the demand valve from impacts and scratches in the most vulnerable places
- Reversible second stage for either a left or right hand gas supply
- Hard wearing satin chrome
- All gas contact moulded parts are produced using an active protection additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae
- Large heat exchanger fitted to help reduce second stage freezing
- Nitrox/Oxygen compatible
Kit Contents:
- 2 ea. DPT DIN 1st stages with 5 port swivel turrets
- 2 ea. MTX-R second stages
- 210cm double swivel hose
- 61cm double swivel hose
- 2 ea. 25cm length MP inflation hoses (one for buoyancy system, one for drysuit)
- 2 ea. TEK pressure gauges with 18cm hoses
- 1 ea. 90° elbow fitting
- 1 ea. bungee necklace
- 1 ea. bungee clip
- 1 ea. stainless steel bolt snap
- 2 sets of short exhaust ports
- Regulator Bag
- Setup illustration, CD manual and quick start guide
- Now includes the new Bungee Connector System
Reviews
There are no reviews yet.