W1670 34" Floor Radial Drill Press
A tilting head benchtop drill press for adjustable angled drilling.
The Shop Fox W1670 34" Floor Radial Drill Press boasts a 1/2 HP motor that smoothly powers the five spindle speeds ranging from 550 to 3000 RPM.
The headstock can be tilted 45° left, 90° right, and slid forward or backward over the column allowing you full adjustability.
To make sure that you get the best use of the 9-3/4" diameter table. The drill press features rack-and-pinion elevation controls—adjustable 24-1/2" vertically, 90° tilt (left and right), and is capable of 360° rotation around the column.
The W1670 can easily drill holes through plastic, fiberglass, and composites, and has a maximum capacity to drill through a half inch of steel without bogging down.
The JT33 keyed drill chuck is fitted to the JT-33 spindle taper and offers up to 3-1/4" of travel. The chuck accepts drill bits from 1/16" to 5/8". You can set the adjustable threaded depth stop for predetermined and repeatable drilling.
The W1670 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your drill press.
Made in an ISO 9001 Factory
CSA certified
SPECIFICATIONS:
- Motor: 1/2 HP, single-phase, 120V, 4.7A
- Swing: 34"
- Drill chuck: 1/16"–5/8"
- Drilling capacity: 1/2" mild steel
- Spindle taper: JT-33
- Spindle travel: 3-1/4"
- Number of speeds: 5, 550–3000 RPM
- Column diameter: 2.79"
- Table size: 9-3/4" dia.
- Table swing: 360°
- Table tilts: 90° L/R
- Table T-slots: 5 @ 5/8"
- Head tilt: 45° L, 90° R
- Footprint: 11" x 11"
- Overall size: 14" W x 32" D x 64-1/2" H
- Approximate shipping weight: 147 lbs.
FEATURES:
- Two-year warranty!!
- Horizontal sliding headstock
- Threaded depth stop
- Table has lock levers
- Cushioned grip quill handles
- Crank handle operated rack-and-pinion vertical table movement
- Radial design allows angle drilling
- Precision-ground cast-iron table
Need help?
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition.
Hover to View Radial Models
Accessories
W1670 34" Floor Radial Drill Press
A tilting head benchtop drill press for adjustable angled drilling.
The Shop Fox W1670 34" Floor Radial Drill Press boasts a 1/2 HP motor that smoothly powers the five spindle speeds ranging from 550 to 3000 RPM.
The headstock can be tilted 45° left, 90° right, and slid forward or backward over the column allowing you full adjustability.
To make sure that you get the best use of the 9-3/4" diameter table. The drill press features rack-and-pinion elevation controls—adjustable 24-1/2" vertically, 90° tilt (left and right), and is capable of 360° rotation around the column.
The W1670 can easily drill holes through plastic, fiberglass, and composites, and has a maximum capacity to drill through a half inch of steel without bogging down.
The JT33 keyed drill chuck is fitted to the JT-33 spindle taper and offers up to 3-1/4" of travel. The chuck accepts drill bits from 1/16" to 5/8". You can set the adjustable threaded depth stop for predetermined and repeatable drilling.
The W1670 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your drill press.
Made in an ISO 9001 Factory
CSA certified
SPECIFICATIONS:
- Motor: 1/2 HP, single-phase, 120V, 4.7A
- Swing: 34"
- Drill chuck: 1/16"–5/8"
- Drilling capacity: 1/2" mild steel
- Spindle taper: JT-33
- Spindle travel: 3-1/4"
- Number of speeds: 5, 550–3000 RPM
- Column diameter: 2.79"
- Table size: 9-3/4" dia.
- Table swing: 360°
- Table tilts: 90° L/R
- Table T-slots: 5 @ 5/8"
- Head tilt: 45° L, 90° R
- Footprint: 11" x 11"
- Overall size: 14" W x 32" D x 64-1/2" H
- Approximate shipping weight: 147 lbs.
FEATURES:
- Two-year warranty!!
- Horizontal sliding headstock
- Threaded depth stop
- Table has lock levers
- Cushioned grip quill handles
- Crank handle operated rack-and-pinion vertical table movement
- Radial design allows angle drilling
- Precision-ground cast-iron table
Need help?
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition.