Buy used:
Used: Like New | Details
Sold by AVGPC
Condition: Used: Like New
Added to

Sorry, there was a problem.

There was an error retrieving your Wish Lists. Please try again.

Sorry, there was a problem.

List unavailable.

Cooler Master ELV8 Addressable RGB Vertical Universal Graphic Card Holder, Built-in ARGB Strip, Adjustable Length & Height Support (MAZ-IMGB-N30NA-R1) Black

4.3 4.3 out of 5 stars 1,921 ratings

To see product details, add this item to your cart. You can always remove it later.
GPU Holder
Color Black
Brand Cooler Master
Item Dimensions LxWxH 12 x 2 x 0.1 inches
Item Weight 148 Grams
Unit Count 1.0 Count

About this item

  • Protect the GPU: prevents GPUs from bending and sagging after long period of use.
  • Universal GPU support: Compatible with most GPUs using length and height adjustment
  • Protect the motherboard: reduces stress on motherboard PCI-E slot by supporting the weight of GPU
  • Co-designed with tantric mods: co-designed with one of the top modders and system builders in the world.Avoid using unofficial software
  • Rgb ready: Sync with as US, MSI, Gigabyte and ASROCK addressable for up to 16.8 million colors of control
  • Dimensions (L x W x H) 305 x 52 x 6 mm / 12 x 2.0 x 0.2 inch
See more product details

Customer ratings by feature

Quality of material
4.4 4.4
Easy to install
4.1 4.1
Value for money
4.0 4.0
Sturdiness
4.0 4.0

Compare with similar items

This Item
Cooler Master ELV8 Addressable RGB Vertical Universal Graphic Card Holder, Built-in ARGB Strip, Adjustable Length & Height Support (MAZ-IMGB-N30NA-R1) Black
Cooler Master ELV8 Addressable RGB Vertical Universal Graphic Card Holder, Built-in ARGB Strip, Adjustable Length & Height Support (MAZ-IMGB-N30NA-R1) Black
Recommendations
upHere 5V 3PIN Addressable RGB Graphics Card GPU Brace Support Video Card Sag Holder,Built-in 5V ARGB Strip,Adjustable Length and Height Support,G276ARGB
dummy
ARGB GPU Support Bracket, GPU Brace Support, 5V 3Pin addressable GPU Holder, 5v 3pin RGB GPU Support Stand Video Card sag Holder, Adjustable Length and Height GPU Stand (Black)
dummy
EZDIY-FAB GPU Support Bracket,Graphics Card Brace,GPU Support Stand Adjustable Height,Aluminum Video Card Sag Holder
dummy
Graphics Card GPU Brace Support, Video Card Sag Holder Bracket, GPU Stand, L
dummy
EZDIY-FAB GPU Holder Brace Graphics Card GPU Support Video Card Holder Bracket with 5V 3 Pin ARGB LED, Video Card Sag Holder/Holster Bracket Support RX6700,RTX3090- 309EZ-Black
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Details
Added to Cart
Price$17.45$15.99$17.99$9.99$9.99$25.99
Delivery
Get it as soon as Monday, Apr 1
Get it as soon as Monday, Apr 1
Get it as soon as Monday, Apr 1
Get it as soon as Monday, Apr 1
Get it as soon as Monday, Apr 1
Customer Ratings
Easy to install
4.1
4.4
3.8
4.7
4.7
4.3
Value for money
4.0
4.2
4.1
4.5
4.5
4.3
Quality of material
4.4
4.0
4.5
4.7
3.1
Sturdiness
4.0
4.4
3.8
4.6
4.4
Stability
4.0
3.5
4.4
4.6
4.3
Sold By
AVGPC
HI PC
JAZZCOOLING
EZDIY-FAB
Sound-US
EZDIY-FAB

From the manufacturer

Header
Main

CM
Make It Yours.

We're all about the things that make building a PC such a rewarding experience. The sense of achievement. The joy of making and creating something uniquely yours in form and function and, of course, the thrill of bringing your creation to life without melting your components.

ELV8

GPU Brace with ARGB Lighting

A smart add-on GPU brace to protect your graphics card and motherboard for longer period of use. The Cooler Master ELV8 helps reduce the sag of heavier graphics cards and the stress on PCI-e slot on the motherboard. The length and height adjustments allows it to work with almost any graphics card. It also features a beautiful addressable RGB strip to enhance the light sync with the entire system.

  • Protect Your Graphics Card & Motherboard
  • Adjustable Support
  • Addressable RGB Lighting
  • Co-designed with Tantric Mods
  • Dimensions (L x W x H) 305 x 52 x 6 mm / 12 x 2.0 x 0.2 inch
Protect-Your-Graphics
Adjustable-Support
Addressable-RGB-Lighting

Product information

Technical Details

Additional Information

Warranty & Support

Amazon.com Return Policy:You may return any new computer purchased from Amazon.com that is "dead on arrival," arrives in damaged condition, or is still in unopened boxes, for a full refund within 30 days of purchase. Amazon.com reserves the right to test "dead on arrival" returns and impose a customer fee equal to 15 percent of the product sales price if the customer misrepresents the condition of the product. Any returned computer that is damaged through customer misuse, is missing parts, or is in unsellable condition due to customer tampering will result in the customer being charged a higher restocking fee based on the condition of the product. Amazon.com will not accept returns of any desktop or notebook computer more than 30 days after you receive the shipment. New, used, and refurbished products purchased from Marketplace vendors are subject to the returns policy of the individual vendor.
Product Warranty: For warranty information about this product, please click here

Feedback

Cooler

Cooler Master ELV8 Addressable RGB Vertical Universal Graphic Card Holder, Built-in ARGB Strip, Adjustable Length & Height Support (MAZ-IMGB-N30NA-R1) Black


Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?

/
/
/
/
Please sign in to provide feedback.

Looking for specific info?

Product guides and documents

Product Description

A smart add-on GPU brace to protect your graphics card and motherboard for longer period of use. The Cooler Master Elv8 helps reduce the Sag of heavier graphics cards and the stress on PCI-E slot on the motherboard. The length and height adjustments allows it to work with almost any graphics card. It also features a beautiful addressable RGB strip to enhance the light Sync with the entire system.

Important information

Bulb Voltage

5 volts

Customer reviews

4.3 out of 5 stars
4.3 out of 5
1,921 global ratings

Customers say

Customers like the quality, appearance and ease of installation of the mount bracket. For example, they mention it's built well, the metal structure is solid and the LED strip is great. Some appreciate the bright and flashy LED lighting. That said, opinions are mixed on performance, support, brightness, value, and size.

AI-generated from the text of customer reviews

82 customers mention65 positive17 negative

Customers like the quality of the mount bracket. They mention it's built well, the metal structure is solid, and the plastic that it shrouds is what encases the GPU. The quality of LED strip is great, and it does not start to sag after time. Overall, customers are happy with their purchase and recommend it to others.

"...All in all, great product, looks great, it syncs with Gigabyte’s RGB Fusion software, besides having to purchase a separate cable for my motherboard..." Read more

"...LED quality is 10/10 and very bright, all effects are smooth and seamlessly match the rest of the build with Asus Aura, and the LED bulbs are not..." Read more

"...a ruler/triangle scale to show the end result but trust me, this thing is cheap (relative to a 1,500 graphics card) and it simply works WHILE..." Read more

"...The support is decent...." Read more

72 customers mention67 positive5 negative

Customers are satisfied with the appearance of the mount bracket. They mention that it looks good, flashy, and premium. The RGB effects are smooth and seamlessly match the rest of the build. The Master logo is elegant and a nice touch. The quality of the colors is solid, and it has a very modest ARGB accent.

"...All in all, great product, looks great, it syncs with Gigabyte’s RGB Fusion software, besides having to purchase a separate cable for my motherboard..." Read more

"...is 10/10 and very bright, all effects are smooth and seamlessly match the rest of the build with Asus Aura, and the LED bulbs are not visible like..." Read more

"...Pro: looks great, easy to install, functional. Cons: occupies a PCI slot, may not be necessary depending on your motherboard and GPU." Read more

"...I think it looks nice, so I'll leave it in for a bit and update the review if it fails or causes trouble." Read more

48 customers mention37 positive11 negative

Customers find the installation of the mount bracket to be easy. They mention that the product is easy to screw in, connect, and adjust. Some say that the ARGB lighting is bright and easy to plug into the header at the bottom of their motherboard. Overall, most are satisfied with the ease of installation.

"...to purchase a separate cable for my motherboard, no complaints, easy to install!" Read more

"...Pro: looks great, easy to install, functional. Cons: occupies a PCI slot, may not be necessary depending on your motherboard and GPU." Read more

"...Sturdy, doesn't bend, easy to adjust and work with." Read more

"I’m really happy with this bracket. Installation is a bit tricky, as others have said, because the thumbscrews that come with the bracket are a..." Read more

23 customers mention16 positive7 negative

Customers are mixed about the brightness of the mount bracket. Some mention that it's bright, cool, and beautiful. The RGB lighting is well diffused and looks nice. However, others say that it doesn't turn on all the way, only few parts are lit up, and the LED bulbs are not visible.

"...LED quality is 10/10 and very bright, all effects are smooth and seamlessly match the rest of the build with Asus Aura, and the LED bulbs are not..." Read more

"...The argb syncs elegantly with my asrock board as is bright to boot. Definitely recommended for those seeking some more cosmetic blog for their system" Read more

"...plugging this baby in and turning on the computer resulted in a static white light that shortly turned off and couldn't be turned back on...." Read more

"...I think it looks really clean and the light bar can get very bright...." Read more

57 customers mention38 positive19 negative

Customers are mixed about the performance of the mount bracket. Some mention that it works fantastic, while others say that it doesn't work that well. The utilitarian function was rather limited, and the software is finicky. The product is made of plastic and does not work well on plastic.

"...As for the support, the bracket is solid and will not give at all. It's the exact length of my Strix 3090...." Read more

"...Pro: looks great, easy to install, functional. Cons: occupies a PCI slot, may not be necessary depending on your motherboard and GPU." Read more

"...matted finish, but in terms of actually supporting the GPU, it doesnt do a good job...." Read more

"...is cheap (relative to a 1,500 graphics card) and it simply works WHILE looking good...." Read more

28 customers mention10 positive18 negative

Customers are mixed about the support of the mount bracket. Some mention that it does not sag and is easy to install, while others say that it sagging terribly.

"Problem: My 3080ti is very heavy & sags on the end - with enough heat cycles this can permanently warp a card...." Read more

"...The sag is definitely lessened, but now the brace itself is slanted downward from the weight...." Read more

"...Not only that, but it sagged terribly, and seemed to be mostly made out of flimsy plastic.Now this one... Wow...." Read more

"...top of the support 'foot' itself has no rubber pad on it.. its slippery enough that the weight of the card causes it to slide outward, letting the..." Read more

19 customers mention13 positive6 negative

Customers are mixed about the value of the mount bracket. Some mention that it has good value for the money, while others say that it's a bit overpriced for what it is. Some customers also mention that the replacement was a dud and the product design is poor.

"...All in all, this thing is most definitely worth the price. Sturdy, doesn't bend, easy to adjust and work with." Read more

"...A solid first attempt by Cooler Master and a good value for the money!" Read more

"...luck with this thing even being able to work for you due to poor design decisions that a fifth grader could have seen as obvious issues, primarily..." Read more

"Reasonably priced aRGB bracket which helps with GPU sag...." Read more

16 customers mention9 positive7 negative

Customers are mixed about the size of the mount bracket. Some mention it's a perfect fit, while others say that it'll hit the hard drive array and cables. Some say that the bracket is huge and not meant for smaller cases. That said, opinions are mixed.

"...A solid chunk of metal. Flat black. No horribly huge, obnoxious logo branding...." Read more

"...The next one was gorgeous, and somewhat cheaper. However, it was too wide, and the RGB connector on the bracket was on the bottom edge... which made..." Read more

"Fits well with rtx 4080. These newer cards are getting heavy ! Plus it looks good 👍..." Read more

"...However, it's a bit short for the larger modern AIB GPUs such as the 3080 and since it's strength comes from the rear side of the case it's not..." Read more

This is a no-brainer buy! Excellent quality, fixed droop in 3080ti
5 Stars
This is a no-brainer buy! Excellent quality, fixed droop in 3080ti
Problem: My 3080ti is very heavy & sags on the end - with enough heat cycles this can permanently warp a card.Possible fix: Jerry-Rig a pulley & hook system with a cable to “lift” the hanging or drooping edge of the GPUReal Solution: Coolermaster GPU Bracket with RGBI bought this for 34 bucks which is around the ballpark for other GPU brackets but this one comes from a reputable company & had ARGB lighting. Opened up the box and all the parts needed for a install were present. I simply removed 3 nuts from the peripherals/GPU rear bracket & installed this in place. I used my original screws but the supplied screws also work fine, they were identical/industry common thumbscrews. The bracket itself is of thick carbon steel & appears a powdercoat or thick paint is applied, well done. It’s not aluminum and has no flex to it.Installed in place, plugged in the ARGB cable to the header on my motherboard, no extensions or plugs or adapters were needed. It’s a basic 4 pin ARGB (3 pins active, one pin blocked or not present). My ASUS motherboard recognized this without software or downloads, it simply controls it and matches all the lighting on the case. I didn’t take a pic after I changed the color of the ARGBs for the case but they all work in tandem, nothing special needed. RGB is great but why did I buy this:The damn droop I was having on this heavy EVGA 3080ti FTW graphics card - Now, It’s completely gone. The bracket comes with a smaller vertical bracket with thumbscrew used to set the height/offset required to get your particular GPU at the needed height to prevent eventual damage to your precious GPU. I set the height I needed, eyeball measured it and bam, done. I took some pics with a ruler/triangle scale to show the end result but trust me, this thing is cheap (relative to a 1,500 graphics card) and it simply works WHILE looking good. I bought this with my own cash, no association or relation to the Coolermaster peeps.RGB added .0788fps to my gaming sessions, I think.
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

Reviewed in the United States on February 4, 2021
Style: GPU HolderVerified Purchase
Customer image
5.0 out of 5 stars Awesome and high quality product
Reviewed in the United States on February 4, 2021
Another great Cooler Master product! I read a few other reviews where some people had issues with this bracket being flimsy, but I didn’t feel as this was the case, as mine felt pretty sturdy. One reviewer also mentioned that the screw holes were not really usable and they said they had to drill a little bit of extra room in order to get the bracket to sit right. I did not have this issue as the screw holes on mine had a little but of wiggle room for me to properly position the bracket.

I have an Aorus RX 5700 XT, which is a huge GPU, and it sits perfectly level, I did not have to forcibly bend the product for it to sit right like a few other reviewers mentioned.

My only complaint with the product is the cable that is supposed to plug into the motherboard. I tried looking for an answer for a while before I bought this product and couldn’t find any clear answer so I hope I can help someone with a similar situation. I have an Aorus Z390 Pro Wifi motherboard which does not have the Gigabyte proprietary 3 pin ARGB connector, but instead a standardized 3 pin ARGB connector. The included cables were long enough to reach the ARGB header located at the top right of the motherboard (I didn’t use the lower one because I would have to shove more cables behind the PSU shroud), however, the 3 pin ARGB connector that is supposed to work for the other brands of motherboards were extremely loose, so I could not plug this product directly into my motherboard.

To solve this issue, I purchased an ARGB splitter cable and plugged it into my motherboard header, and directly plugged that into the cable for the bracket, completely leaving out the included cable that adapts to different motherboards. If you do this, I recommend using the included cable connection holder because for some reason, all the Cooler Master cable connectors just seem to be loose.

**If your motherboard has a jumper for your ARGB header, make sure it is set to 5V and not 12V, or you will burn up this product.**

All in all, great product, looks great, it syncs with Gigabyte’s RGB Fusion software, besides having to purchase a separate cable for my motherboard, no complaints, easy to install!
Images in this review
Customer image
Customer image
2 people found this helpful
Report
Reviewed in the United States on January 26, 2021
Style: GPU HolderVerified Purchase
Customer image
5.0 out of 5 stars Best buy, top quality, perfectly supports heavy 3090 Strix
Reviewed in the United States on January 26, 2021
So glad I spent the extra money on this one instead of the cheapo brands. LED quality is 10/10 and very bright, all effects are smooth and seamlessly match the rest of the build with Asus Aura, and the LED bulbs are not visible like on the cheap ones. It even comes with an aRGB extension cable!

As for the support, the bracket is solid and will not give at all. It's the exact length of my Strix 3090. Ignore reviews saying it doesn't support a 30-series as you can clearly see they installed it wrong. To install this properly, mount it while your case is HORIZONTAL on a table and the bottom hole of the GPU and the top hole of the bracket should share the same screw.

I never review things but was so pleasantly surprised by the build quality of this and the extra mounting parts that I had to recommend it.
Images in this review
Customer image
Customer image
2 people found this helpful
Report
Reviewed in the United States on August 17, 2023
Style: GPU HolderVerified Purchase
One person found this helpful
Report
Reviewed in the United States on May 25, 2022
Style: GPU HolderVerified Purchase
Customer image
5.0 out of 5 stars This is a no-brainer buy! Excellent quality, fixed droop in 3080ti
Reviewed in the United States on May 25, 2022
Problem: My 3080ti is very heavy & sags on the end - with enough heat cycles this can permanently warp a card.

Possible fix: Jerry-Rig a pulley & hook system with a cable to “lift” the hanging or drooping edge of the GPU

Real Solution: Coolermaster GPU Bracket with RGB

I bought this for 34 bucks which is around the ballpark for other GPU brackets but this one comes from a reputable company & had ARGB lighting. Opened up the box and all the parts needed for a install were present. I simply removed 3 nuts from the peripherals/GPU rear bracket & installed this in place. I used my original screws but the supplied screws also work fine, they were identical/industry common thumbscrews. The bracket itself is of thick carbon steel & appears a powdercoat or thick paint is applied, well done. It’s not aluminum and has no flex to it.

Installed in place, plugged in the ARGB cable to the header on my motherboard, no extensions or plugs or adapters were needed. It’s a basic 4 pin ARGB (3 pins active, one pin blocked or not present). My ASUS motherboard recognized this without software or downloads, it simply controls it and matches all the lighting on the case. I didn’t take a pic after I changed the color of the ARGBs for the case but they all work in tandem, nothing special needed. RGB is great but why did I buy this:

The damn droop I was having on this heavy EVGA 3080ti FTW graphics card - Now, It’s completely gone. The bracket comes with a smaller vertical bracket with thumbscrew used to set the height/offset required to get your particular GPU at the needed height to prevent eventual damage to your precious GPU. I set the height I needed, eyeball measured it and bam, done. I took some pics with a ruler/triangle scale to show the end result but trust me, this thing is cheap (relative to a 1,500 graphics card) and it simply works WHILE looking good. I bought this with my own cash, no association or relation to the Coolermaster peeps.

RGB added .0788fps to my gaming sessions, I think.
Images in this review
Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image Customer image
Customer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer imageCustomer image
16 people found this helpful
Report

Top reviews from other countries

Translate all reviews to English
HorseLover
5.0 out of 5 stars Incredible quality, design & aesthetics... 🐝
Reviewed in the United Kingdom on January 21, 2024
Style: GPU HolderVerified Purchase
Customer image
HorseLover
5.0 out of 5 stars Incredible quality, design & aesthetics... 🐝
Reviewed in the United Kingdom on January 21, 2024
It's difficult trying to find quality as theres just so much pure trash on the market (whether its designed in the U.K., U.S.A., China or otherwise; but I'm really impressed with this and so glad I chose it over others (and I have *really* high standards being a designer) but this is awesome!

Aesthetically, design/materials wise, ease of use, overall strength (all fantastic) and the LED light was really just a bonus as I mainly wanted to simply protect my GFX card/MB (naturally) but I have to say that the LED beam like design is really cool as it's understated and simple but looks really elegant and wonderfully bright and colourful!

I really like the design, which is thoughtfully constructed of premium feeling materials and simple to setup and you have a choice of which way the L-Riser is pointing to best suit you chosen card (GTX-1280-TI) ...and height adjustment too!

I was *extremely* surprised they didn't include a small silicon rubber pad on the L-Riser (or choice of for best fit) as naturally anything that spins produces vibration and noise so a small rubber square on top instead of shiny (slippery) enamel covered aluminium would do a lot here because:

A) It would dampen vibration from the 3 fans in the card and any residual vibration coming from the rest of the tower (I use Noctua anyway which include removable chassis dampers as standard)

B) Provide a better grip and more forgiving surface to hold it in place considering most GFX cards have peculiar curved shapes around the fans so a shiny flat aluminium surface only touches with no grip?

C) On the GTX-1280-TI with Corsair Case the mount has to be at maximum extension to clear its overall form (perfect fit) but providing a strip of small adhesive silicon bumper sizes would provide more flexibility to refine the position and grip and also likely fit a wider choice of GFX cards too!

Naturally, tiny silicon bumpers are inexpensive, so it's easy to D.I.Y. but; obviously I'd prefer to have a bespoke aesthetically matched part rather than wasting time trying to find something suitable but I'll consider that option as it improves it further!

Regardless, this is a fantastic well made GFX card riser, it feels sturdy, looks awesome and provides excellent support and peace of mind - groovy!
Images in this review
Customer image Customer image
Customer imageCustomer image
Emmanuel
5.0 out of 5 stars Cuidado, no se confíen de que será compatible con su tarjeta
Reviewed in Mexico on May 25, 2021
Style: GPU HolderVerified Purchase
3 people found this helpful
Report
Marcos
5.0 out of 5 stars Un soporte estelar con un toque luminoso
Reviewed in Spain on October 25, 2023
Style: GPU HolderVerified Purchase
Fabio Kacuta
4.0 out of 5 stars Suporte rígido, porém inadequado para placas muito grandes
Reviewed in Brazil on January 29, 2021
Style: GPU HolderVerified Purchase
Customer image
Fabio Kacuta
4.0 out of 5 stars Suporte rígido, porém inadequado para placas muito grandes
Reviewed in Brazil on January 29, 2021
Houve uma dificuldade para montar o suporte para uso na TUF 3070. A "mão francesa" que faz contato com a placa de vídeo fica posicionada muito ao centro da placa, fazendo contato com as ventoinhas e impedindo a rotação.

A solução foi desparafusar a peça e montá-la de forma invertida (com o L na parte externa), assim a superfície de contato fica um pouco mais longe da ventoinha e próxima ao limite da placa, para que a superfície não encostasse na pá.

Fora isso, o suporte é bastante rígido e firme. A barra é metálica e um tanto grossa. A peça que faz contato com a placa é plástica e poderia ser feita de um material melhor, além de ter uma superfície menor para não interferir com as ventoinhas.

Imagino que placas muito grandes, mais largas que o espelho PCI, terão algum problema para fazer o suporte funcionar sem contato da peça com as ventoinhas.
Images in this review
Customer image
Customer image
6 people found this helpful
Report
O. K.
5.0 out of 5 stars Super Anti Sag Bracket!
Reviewed in Germany on January 12, 2022
Style: GPU HolderVerified Purchase
4 people found this helpful
Report