- VIDEO
Image Unavailable
Color:
-
-
-
- To view this video download Flash Player
5PCS FEP Film 200x140x0.15mm for ANYCUBIC Photon, Photon S, Mono 4K, ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, Phrozen Sonic Mini 4K, Creality Halot-one, LD-002H LCD 3D Printer Resin Fep Replacement
Brand | Mefine |
Material | Resin |
Color | FEP 1.0 |
Compatible Devices | Laptop, Smartphone |
Compatible Material | Resin |
About this item
- Wide Application: Suitable for all desktop LCD 3D Printer that prints size no more than 200x140mm(L*W), such as ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon Mono 4K, Photon Mono SE, Photon S, Photon Mono, Phrozen Sonic Mini 4K, Voxelab Proxima 6.0, Creality Halot one, LD-002R, LD-002H etc. Please note that this release film does not have a frame, so it is not suitable for the models that need to replace with the release film with a sealed frame.
- High Purity FEP: Special FEP release film for 3D printing, using ultra-high purity FEP. Made of hot melt extruded cast film and has excellent non-stick, high-temperature resistance, electrical insulation, mechanical properties, wear resistance, and other characteristics. Size: 200x140mm; Thickness: 0.15mm; Quantity: 5 pieces.
- High Transmittance: With over 95% light transmittance, this ultra-transparent film ensures the high stability of UV lightning.
- High-Temperature Resistance: Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging.
- Excellent Ductility: Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times.
Similar items that may ship from close to you
- 6PCS Creality FEP Film Release Films 260 x 200 x 0.15mm for ELEGOO Saturn/Saturn S/Mars 3 Pro/ANYCUBIC Photon Mono X/Photon Mono X2/Photon Mono X 6K/Photon M3/Phrozen Sonic Mighty 4K LCD 3D PrinterFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
- KOYOFEI 6 PCS FEP Film 3D Printer Accessories Spare Parts, FEP Film for ELEGOO Saturn 2, Saturn3, Sonic Mighty 8K, Photon M3 Premium, Photon M5, Halot Mage 10.1 inch Resin 3D Printer 320x220x0.15mmFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
- ANYCUBIC FEP Film for Resin Printers Below 6.23 Inches, Only Suitable for Photon Mono/Mono 4K/Photon Ultra/Photon D2, Not for Photon Mono 2 (2PCS)FREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
- Anycubic FEP Film 5PCS for Photon Mono 2, Integrated Design, Easy to ReplaceFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
- 10pcs FEP Film, 260 x 200 x 0.15mm FEP Release Films Fit for Anycubic Photon Mono X, Photon Mono X 6K, Photon Mono X2, Photon M3 Plus, Elegoo Saturn, Saturn S, Saturn 4K, 3D Printer Accessories PartsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
- Sovol 3D Printer Resin Vat Anodized Aluminium with FEP Film & Steel Ring Preinstalled, Durable Metal Frame Resin Tank with Double Silicone Covers Fits for Mars 2 pro Photon Mono 4K 3D PrinterFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
From the brand
-
CREALITY was founded in 2014, is a 3D printer, 3D scanner, research and development, production, and sales in one of the innovative high-tech enterprises, CREALITY services worldwide.
CREALITY products fully meet the needs of different types of users; at the same time, it is at the leading level of the industry in many aspects such as technology research and development, channel construction, and after-sales service.
Compare with similar items
This Item 5PCS FEP Film 200x140x0.15mm for ANYCUBIC Photon, Photon S, Mono 4K, ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, Phrozen Sonic Mini 4K, Creality Halot-one, LD-002H LCD 3D Printer Resin Fep Replacement | Recommendations | dummy | dummy | |
Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | ||
Price | Currently unavailable. | $9.99$9.99 | $29.99$29.99 | $21.99$21.99 |
Delivery | — | Get it as soon as Monday, Apr 1 | Get it as soon as Monday, Apr 1 | Get it as soon as Monday, Apr 1 |
Customer Ratings | ||||
Value for money | 4.0 | 3.7 | 4.0 | 3.9 |
Adhesion | 3.6 | 3.8 | 4.4 | 3.1 |
Sheerness | 4.1 | — | — | 3.9 |
Easy to install | 3.9 | 3.1 | — | — |
Print Quality | — | 3.8 | 4.4 | — |
Sold By | — | Koyofei | ELEGOO Official US | Sovol |
compatible material | Resin | Resin | Resin | Resin |
material | Resin | FEP | Resin | Metal |
weight | — | 80 grams | 0.3 pounds | — |
Product Description
140*200mm FEP Film | 200*260mm FEP Film | 260*380mm FEP Film | 210*300mm FEP Film | |
---|---|---|---|---|
Add to Cart
|
Add to Cart
|
Add to Cart
|
||
Customer Reviews |
4.6 out of 5 stars
949
|
4.4 out of 5 stars
409
|
4.3 out of 5 stars
23
|
4.5 out of 5 stars
94
|
Size | 140*200*0.15mm | 200*260*0.15mm | 260*380*0.15mm | 210*300*0.15mm |
Compatible Models:
Creality Halot-one, LD-002R, LD-002H;
ELEGOO Mars, Mars 2 Pro, Mars 3, Mars 3 Pro;
ANYCUBIC Photon, Photon Mono 4K, Photon Mono SE, Photon Mono SQ, Photon Mono S, Photon zero;
Phrozen Sonic Mini 4K, Voxelab Proxima 6.0, Longer orange 10, Longer orange 30, Longer orange 4K,
and other desktop LCD 3D Printers which has fep vat size no more than 200x140 mm/7.87*5.51 in(L*W).
ATTENTION: This release film doesn't have a frame, so it is not suitable for the models that need to replace the release film with a sealed frame. If your 3D printer is Anycubic Mono 4K/2K Photon Ultra/D2, please check whether your resin vat should be replaced with the film with a frame or not.
|
|
|
---|---|---|
High Transmittance200x140 FEP film has a light transmittance of up to 95%, which makes the printed products more perfect. |
High-quality FEP FilmsFEP release film has excellent non-stick, high-temperature resistance, insulation, mechanical properties, and wear resistance characteristics. |
Tear off the Protective FilmIn order to prevent the FEP film, we have protective films on both sides of each film, please tear them off before use. |
|
|
|
---|---|---|
Step 1Remove the screws to detach the steel rings from the resin vat. Tear off the protective film on both sides and take out the FEP film in the middle. |
Step 2Put the new FEP film in-between the two steel rings and install those screws back. You may need to force the screw in. |
Step 3Use a utility knife to cut off the excess release film on the edge and ensure the FEP film is clean and tensioned properly |
Videos
Videos for this product
1:16
Click to play video
How to replace the FEP film
Qyue
Looking for specific info?
Product information
Package Dimensions | 10 x 8 x 0.5 inches |
---|---|
Item Weight | 3.2 ounces |
ASIN | B088GWPWFR |
Item model number | FEPFILM5 |
Customer Reviews |
4.6 out of 5 stars |
Best Sellers Rank | #85,262 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #1,208 in 3D Printer Accessories |
Date First Available | September 15, 2020 |
Manufacturer | Mefine |
Feedback
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the performance of the 3D printer. For example, they mention it works fantastic and perfectly with their Elegoo Mars 3D Printer. That said, opinions are mixed on the quality and ease of installation.
AI-generated from the text of customer reviews
Customers like the performance of the 3D printer. For example, they say it works perfectly with their Elegoo Mars and works well immediately. Some mention it's easy to replace and has no issues.
"...quite the process to install these things but when done correctly it works great." Read more
"I’ve used two of these so far, and they worked without any issues...." Read more
"...Reduced lift speed to a crawl in my settings, still failed supports. I can hear the resin sticking to the FEP (louder than normal)...." Read more
"Used for an older Photon S model and worked perfectly, only real gripe would be it picks up dust really easily and doesn't outline removing the film..." Read more
Customers are mixed about the quality of the 3D printer. Some mention that it produces excellent prints, and prints reliably. However, others say that they started noticing issues with their prints, they would fail or delaminate.
"...It also last for a good amount of prints...." Read more
"...Now my prints are coming out perfect. And I totally didn't forget to take off the protective film of the FEP before installing it...." Read more
"...them with the liners still on before realizing why my prints kept failing. Oops!" Read more
"...Came perfect without scuffs and scrapes which can't be said about most FEP sheets on here...." Read more
Customers are mixed about the ease of installation of the 3D printer. Some mention that it's super easy to install and simple, while others say that the included instructions are absolutely no help and incomplete.
"Fantastic Product and super easy to install, took a while just to take the screws but overall easy. Perfect fit for Anycubic Photon Mono SE" Read more
"...The included instructions are absolutely no help and incomplete. You'll end up having to buy a new printer." Read more
"...A lot of screws but in the end it was very simple and took no more than 5 minutes...." Read more
"Easy to install" Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
As it turns out, Anycubic changed the design of the resin vat that ships with the photon mono 4k. However, the seller worked with me and refunded my purchase after we realized this change was made.
It also last for a good amount of prints. I could get about 40-50 prints out of one sheet before seeing some slippage or fails so yeah, highly recommend this film for printing.
Top reviews from other countries
Reviewed in the Netherlands on July 28, 2023
Rien à dire quand même assez epais.