Deep Clean Mopping Combo

The Q7 Max is equipped with 11 oz of consistent mop pressure and an electronic water tank. The electronic water tank can provide 30 different water flow levels letting you adjust different water flows depending on your different floor types.

4200Pa* Powerful Suction

The Q7 Max easily pulls dirt, debris, and pet hair wherever they hide. When the carpet is detected, the Q7 Max will automatically increase its suction to maximum power, capturing as much dirt as possible.

PreciSense LiDAR Navigation

PreciSense LiDAR navigation provides a precise mapping of your home. The Q7 Max cleans more efficiently, with smarter and more efficient routes.

Auto Empty Dock Pure Support

The Auto-Empty Dock Pure means you no longer need to worry about emptying the robot’s dustbin. The robot will do it for you, pulling dust into its 2.5 L dust bag, for up to 7 weeks* of cleaning.

* Actual emptying interval will depend on use and environmental factors.

Note: The Auto-Empty Dock Pure only supports 100V-120V voltage and NEEDS to be Purchased Separately.

* Based on internal testing carried out by the manufacturer according to IEC 62885-2:2016 / 5.8 standards, using Max+ mode with a full battery. Actual results may vary according to the home environment.

Multi-directional floating Main Brush

The Q7 max comes with an upgrade multi-directional floating all-rubber main brush. The brush sits closer to the ground, for deeper cleaning while minimizing tangled long hair and pet hair.

Combined Dustbin & Water Tank

Combining the 470 ml dustbin and 350 ml water tank means that you can clean more often without worrying about emptying or refilling.

Long-Lasting Cleaning

A specially designed battery makes Q7 Max runs for 180 minutes* or a maximum vacuuming range of 3229 sqft*.

Keep Kids & Pets Safe

Once you turn on the child lock, all buttons on your robot will be locked to avoid being accidentally started by children or pets.

* Based on internal testing carried out on hard floors with a full water tank, full battery, and low water flow.

3D Mapping

3D Mapping creates a 3D map of your home. It lets you add furniture and even select floor materials in each room, letting you build and see your home virtually.

Custom Routines

You can now personalize your robot’s cleaning routines, by saving regular tasks within the Roborock App. You can tell your robot to clean around the dinner table after eating, and name this task “After meal”

Multi-Level Mapping

Multi-level mapping can distinguish the different levels of your home automatically. You only need to set the robot down on the floor. No need for additional docks, the app will automatically indicate which level it is on. A maximum of four levels are supported.

No-Go Zones, No-Mop Zones, and Invisible Walls

No-Go Zones, No-Mop Zones, and Invisible Walls can be used to precisely define where you want the robot to go. These can all be managed using the Roborock app.

Schedule Cleaning

An advanced scheduling tool allows you to design cleaning plans that are specific to your home. The robot will automatically repeat at the chosen time and suction strength.

* App connection requires 2.4Ghz Wi-Fi.

Avoid Obstacles

The Q7 Max can detect all obstacles in its path, such as chair legs, and expertly avoid them.

Detect Stairs

You no longer need to worry about your robot falling down the stairs. The Q7 Max moves safely with PreciSense LiDAR.

Automatically Recharge

The Q7 Max will go back to the dock to recharge when the power is low, resuming cleaning where it left off.