This product is 100% compatible with the Wink Hub. Ignore the description stating that it is not compatible. My primary goal was to have the motion detector trigger my tapt light switch which controls my porch/garage light. It does not detect through glass so it is sitting outside above my door under the porch cover. I will update later on how it is holding itself outdoors.
Setup was a breeze,
Open the box and pull out the plastic tab on the motion detector to activate the battery.
There is also a bracket that can be used for corners or flat surfaces, plus screws and 3M mounting tape.
Use a paper clip to insert into the little hole in the back of the device to put it into inclusion mode aka "pairing mode".
Open up the wink app on iOS or android and add a z-wave sensor. (mine connected under a minute)
Next you want to setup "Robots" within the wink app. You will need to setup two Robots. One to turn it on with motion and a second one to turn it off when no motion is detected.
There is a limitation with the PIR Motion Detector itself, once a motion has been detected, the PIR motion detector will wait 4 min. before sensing motion again (this is to conserve battery life). Don't expect the motion detector to turn on the light for you and then turn itself off right away as you leave the room. It will wait 4 minutes to see if there is still motion or the lack off. Basically expect whatever triggers to be on for at least 4 minutes. You can use the included pin jumper to put the detector into test mode to detect every 5 seconds but this will kill your battery life. It works great at triggering my lights and also turning the lights off with no motion. This was my main concern.
There is three settings for motion sensitivity. Default is set on for small pet "Jumper pin set on 1". Jumper pin set on 2 would have the least range and sensitivity. Having no jumper has the highest range and sensitivity. Default worked the best for me.
I have also used the Z-Wave PIR motion detector to trigger my GE Link LED light bulbs and Pivot Power Genius.
My conclusion is that this is a great addition for home security and people who own the Wink Hub.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Consider a similar item
Amazon's Choice
Frequently bought together
$43.29
Get it as soon as Thursday, Apr 25
Only 18 left in stock - order soon.
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
From the manufacturer
Pet Immunity Motion Detector Sensor (PIR-ZWAVE2.5-ECO)
Help secure your home with this easy-to-install Sensor
This Ecolink Pet Immunity Motion Detector is a Z-Wave Plus enabled device designed to smoothly integrate into a Z-Wave Plus home automation network. It will detect motion and will alert your system of any intrusion immediately. It is immune to movement of pets as large as 55 lbs.
Dual Mode: Automation and Security
Premium components provide accurate and instant motion detection in both Automation mode (e.g. to control your lights) and Security mode (for instantly alerting you of an intrusion).
- Motion Detector Sensor with Pet Immunity
- Automation mode and Security mode
- Natively compatible with SmartThings
- Easy to Install
- Z-wave ID: ZC10-16020001
Z-Wave Technology compatible with SmartThings
The Z-Wave technology is designed for control, monitor and status reading applications in homes around the world. Z-Wave specialize in wireless control, bringing affordable easy-to-use 'smart' products to millions of people.
Natively compatible with SmartThings, it works with most brands of Z-wave home security hubs like Vera Plus, Vera Edge, Vera Lite, HomeSeer, D-link staples connect and Piper NV. If your brand is not listed, (e.g. Wink or Alarm.com based security panels) compatibility cannot be guaranteed.
Z-wave ID for this item: ZC10-16020001
Enjoy the benefit of our experience in Home Automation systems
|
|
|
|
|---|---|---|
No False Alarm Due To The Pet ImmunityOvercomes potential interference of pets as large as 55 lbs, saving nuisance because of false alarms. |
Easy InstallationThis sensor comes with an easy flush mounting bracket that also supports corner mounting. After mounting, simply insert the battery to begin the learning process. |
Discover EcolinkEcolink develops low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices. |
Compare with similar items
This Item  Ecolink Z-Wave PIR Motion Detector Pet Immune, White (PIRZWAVE2.5-ECO) |  |  |  |  | |
| Price | -17% $43.29 List: $52.32 | -5% $26.44 Typical: $27.84 | -9% $38.99 List: $42.99 | -10% $22.25 Typical: $24.71 | $49.90 |
| Delivery | Get it as soon as Thursday, Apr 25 | Get it as soon as Thursday, Apr 25 | Get it as soon as Friday, Apr 26 | Get it as soon as Thursday, Apr 25 | Get it as soon as Thursday, Apr 25 |
| Customer Ratings | |||||
| Easy to install | |||||
| Motion detection | |||||
| Battery life | |||||
| Sold By | Amazon.com | Amazon.com | Z-Wave Products | DirectSupplyClub | primera |
| power source | Battery Powered | Battery Powered | Battery Powered | Corded Electric | AC |
| maximum range | 500 feet | 12 meters | 50 feet | 56 feet | 130 feet |
| weight | 0.28 pounds | 0.25 pounds | — | 2.39 ounces | 0.21 pounds |
Reviews with images
Decent, no-frills motion sensor
The "Ecolink Z-Wave PIR Motion Detector, Pet Immune (PIRZWAVE2-ECO)" has been running in my home for just under 5 months and has been doing a bang-up job with little to no complaints by me.It is a standard-sized format Z-Wave enabled motion sensor which I have paired with my Raspberry Pi/Domoticz z-wave home control setup. Pairing was simple: insert the battery and switch your z-wave controller into inclusion mode. It was found immediately with no issues and is reported in Domoticz (OpenZWave) as two separate sensors: the motion sensor and a tamper switch. The tamper switch is simply an on/off switch to advise when the case has been opened.The sensor is corner-mounted in my entry hallway approximately 9 inches (~22.8 cm) from the ceiling and points towards the kitchen/living room area however, as it does have a wide field of view it covers even the bedroom door areas. From its location it points down the hallway and through the galley-style kitchen and on into the dining area with clear line of sight; a total length of approximately 32 feet (~9 3/4 meters). I have the unit set to the highest sensitivity (a simple jumper connection within the unit changes this) which detects even a small movement at the far end of the dining area.Keep in mind the sensor is hard-coded with a 4-minute cycle time meaning it turns on then remains in the current state for 4-minutes before checking again. For me it is no issue however if you are looking for a smaller time frame this is probably not the unit for you. It also reports battery level and after just under 5 months my unit is still reading 99%. Not too shabby.I have my system set up to activate a hall light when movement is detected (only after dark and only between a certain time period) and it works like a charm. There is a slight delay of approximately 1-2 seconds at times though I believe that is due to the large distance between the motion sensor and the Z-Wave controller - the signal needs to be repeated to and from the controller to reach the unit. If I set up a light as a slave device the delay almost completely disappears.Overall, this unit suits my setup almost perfectly and I'll be purchasing a few more in the near future to automate a few more lighting scenarios.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on March 4, 2015
Style: Z-WaveConfiguration: SingleVerified Purchase
I've had this working now for about a month. So far I have no issues with the detector, It seems to be well built and detects motion with no false detects or non-detect issues.
Sensitivity is adequate, it has a jumper setting (see picture) for no-pet, small pet and large pet..
It also has a jumper for motion reset, which sets the default time to reset after motion is detected from 4 minutes to 5 seconds for testing. By default once motion is detected it will be four minutes before it can trigger again.
It added fine to Wink by putting Hub in inclusion mode (Add Product > Sensors > Z-Wave sensor) then motion detector in inclusion mode (pull tab on battery or paper clip in small round hole in back).
As others have said it detects motion and will send e-mails and/or texts. You can set up a schedule as to when it alarms, such as only alerting from midnight to 7 am as an example. I set it up to turn on a light, but as others have said Wink has no way to turn off the light. The robot functionality in Wink leaves something to be desired. Hopefully this will be addressed in a future update.This is not a Ecolink problem, this is a Wink problem.
Also another thing I would like Wink to do is be able to group these devices so I can turn them on/off as a group. Example: Currently if I want to turn on 8 motion detectors when I leave the house I have to drill down into 8 devices and turn them on/off individually. This takes WAY to much time. As said earlier, Wink issue not Ecolink.
As soon as Wink upgrades their robot software I will buy more. But as the software exists today (again, wink issue) adding and managing motion sensors is not implemented well enough to justify buying more of these.
[7/31/2015 Update] Robots on Wink now work to turn things on if motion detected and off if inactive for X amount of time. So, I can finally recommend for Wink users.
[11/2/2015) I was holding this down to four stars due to a WINK problem not EcoLink, I've increased this to 5 stars now that WINK has fixed their robots and shortcuts to allow me to turn on and off multiple robots from a single shortcut. This means, in effect, that I can turn on (or off) monitoring of multiple motion sensors (or other things) from a single shortcut. So I can finally hit one button to "turn on monitoring" and a single button to "turn off monitoring" making this product MUCH more useful as a whole house monitoring solution.
Sensitivity is adequate, it has a jumper setting (see picture) for no-pet, small pet and large pet..
It also has a jumper for motion reset, which sets the default time to reset after motion is detected from 4 minutes to 5 seconds for testing. By default once motion is detected it will be four minutes before it can trigger again.
It added fine to Wink by putting Hub in inclusion mode (Add Product > Sensors > Z-Wave sensor) then motion detector in inclusion mode (pull tab on battery or paper clip in small round hole in back).
As others have said it detects motion and will send e-mails and/or texts. You can set up a schedule as to when it alarms, such as only alerting from midnight to 7 am as an example. I set it up to turn on a light, but as others have said Wink has no way to turn off the light. The robot functionality in Wink leaves something to be desired. Hopefully this will be addressed in a future update.This is not a Ecolink problem, this is a Wink problem.
Also another thing I would like Wink to do is be able to group these devices so I can turn them on/off as a group. Example: Currently if I want to turn on 8 motion detectors when I leave the house I have to drill down into 8 devices and turn them on/off individually. This takes WAY to much time. As said earlier, Wink issue not Ecolink.
As soon as Wink upgrades their robot software I will buy more. But as the software exists today (again, wink issue) adding and managing motion sensors is not implemented well enough to justify buying more of these.
[7/31/2015 Update] Robots on Wink now work to turn things on if motion detected and off if inactive for X amount of time. So, I can finally recommend for Wink users.
[11/2/2015) I was holding this down to four stars due to a WINK problem not EcoLink, I've increased this to 5 stars now that WINK has fixed their robots and shortcuts to allow me to turn on and off multiple robots from a single shortcut. This means, in effect, that I can turn on (or off) monitoring of multiple motion sensors (or other things) from a single shortcut. So I can finally hit one button to "turn on monitoring" and a single button to "turn off monitoring" making this product MUCH more useful as a whole house monitoring solution.
Images in this review
Top reviews from other countries
Sean Thomson
UK and Europe NOT compatible - 908MHz North America Version Supplied
Reviewed in the United Kingdom on March 20, 2024Style: Z-WaveConfiguration: SingleVerified Purchase
Michael
Works great with SmartThings!
Reviewed in Canada on February 9, 2018Style: Z-Wave PlusConfiguration: SingleVerified Purchase
Aldo E
Excelente
Reviewed in Mexico on January 29, 2017Style: Z-WaveConfiguration: SingleVerified Purchase
Carolina Mosiño
Llego sin pila ni accesorios de montaje
Reviewed in Mexico on July 23, 2020Style: Z-Wave PlusConfiguration: SingleVerified Purchase
Carolina Mosiño
Reviewed in Mexico on July 23, 2020
Images in this review
Mike
Great Product. Works Great!
Reviewed in Canada on November 20, 2019Style: Z-Wave PlusConfiguration: SingleVerified Purchase
