Price on this was about five times as much as the first mount I ordered--but the sturdiness, quality, fit, and finish were FAR better than the first one. This mounted easily and quickly. The adjustments are almost infinitely variable, and since this is made of cast and machined aluminum you will not worry about this fracturing, bending, falling, or breaking--nor will your worry about your expensive camera or projector falling due to failure of the mount.
Another great aspect of this mount? If you were a little off in your measuring for mounting your projector (mine is an LG PF1500 1080p native-res) this will allow you to orient your projector right, left, forward, or back, as long as the mount is low enough to permit those adjustments. For example, my screen's viewing area is approximately 9.5" below the ceiling, and the top of my projector's image begins at the center of its lens. If I need to make adjustments I would want to have the mount far enough from my ceiling to allow a bend in the mount, which would then move the top of the image upward somewhat, toward the ceiling. In other words, if you want such adjustments attach the mount to a wooden block, etc. to get it a little lower, so that adjusting the joints won't raise your projector above where you need it to be.
At any rate, I have not found any ceiling mount for a small projector like mine that provides the range of adjustment yet is so sturdy. I have no reservations about heartily recommending this one!
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Additional Details
Small Business
Shop products from small business brands sold in Amazon’s store. Discover more about the small businesses partnering with Amazon and Amazon’s commitment to empowering them.
Small Business
This product is from a small business brand. Support small.
Frequently bought together
$37.48
Get it as soon as Monday, May 20
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Top rated similar items
Page 1 of 1 Start overPage 1 of 1
From the brand
-
Headquartered in Southern California, ARKON Mounts is a leading global manufacturer of high-quality, professional-grade mounts and holders for tablets, smartphones, and other mobile devices. Founded in 1988, our commitment to quality and our customers has made us the go-to choice for keeping your digital world secure and within reach.
-
Elevate Your Handling Game
Our material handling product line is designed to make the jobs of forklift drivers and operations easier, convenient, and safe.
-
-
Serving Trucks and Fleets
We're proud to offer an extensive product line that is trusted to serve thousands of fleet and trucking operators globally.
-
-
Precision-Made Device Mounts
We make reliable device mounts from trusted quality materials, ensuring strength and durability.
From the manufacturer
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
3:55
Click to play video
Install & Test Arkon Camera Wall Mount
Knowledge Sharing Tech
Videos for this product
0:53
Click to play video
LIVE VIEW - Arkon Camera Wall Mount for CCTV Cameras
🛍️ Kumo Shops
Reviews with images
One thing that concerns me...
I wouldn't have thought about this until I got it in my hands, and the product photos DO seem to reflect this, but: the mounting/post screw is kind of short.I have two other mounts with the "camera mounting post", and those two are much longer than the one here. Now, normally I wouldn't be terribly concerned, but my plan is to mount a small and lightweight projector from it. Not sure why the screw has been made so short, the post's collar is intended to "shorten the screw" if necessary. (NOTE: In the picture, I have this product on top, facing down, so that the screw sizes can be compared. Both of the products have a rubber'ish washer around the post, so that's not the issue.)Overall, the design seems good other than this flaw. The joints are tight when the screws are tightened and the joints are flexible when its time to arrange them. I also like that there are a variety of screw holes (and sizes) in the base mounting plate.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on February 9, 2021
Style: MountVerified Purchase
After trying a cheap 10 dollar option that failed miserably I was determined to find something that would just work, even if it cost a little more than I wanted to spend. Let me tall you, I'm so glad I spent the extra few bucks!
This thing is so good. I'm using it in a little less traditional sense. I took an idea from one of the reviews here where they had their projector mounted on this and then some T-Track. I refined the design a bit as I wanted this thing to be really sturdy, and it is. I may have put most of my weight and hung off this thing for a split second to make sure it wasn't going anywhere... It didn't budge. Now I can move my camera into virtually any position I want for overhead and top down shots! If I need more range I can just mount more T-Track and bam.
This mount uses the standard AMPS mounting pattern of 30x38mm. Mine also had three additional holes in a triangular pattern. I used some M3 head screws and nuts, I think they were 12mm in length. M4 screws will just fit though the holes, but I wanted a little wiggle room to account for just using a hand drill instead of drill press to bore them.
The mount articulates very nicely with two ball joints on either end and an elbow joint in the middle. The elbow joint has teeth to keep it locked in place and the ball jointed have a small grooved pattern machined into them to really lock things into place. The camera and lens on here weigh in at only about 1.5lbs, but I can tell you thing can hold a lot more weight than that if it needed to. Not just hold it either, but LOCKS it into place. Super impressed with this mount that I actually purchased a different model Arkon mount to complete my setup.
This thing is so good. I'm using it in a little less traditional sense. I took an idea from one of the reviews here where they had their projector mounted on this and then some T-Track. I refined the design a bit as I wanted this thing to be really sturdy, and it is. I may have put most of my weight and hung off this thing for a split second to make sure it wasn't going anywhere... It didn't budge. Now I can move my camera into virtually any position I want for overhead and top down shots! If I need more range I can just mount more T-Track and bam.
This mount uses the standard AMPS mounting pattern of 30x38mm. Mine also had three additional holes in a triangular pattern. I used some M3 head screws and nuts, I think they were 12mm in length. M4 screws will just fit though the holes, but I wanted a little wiggle room to account for just using a hand drill instead of drill press to bore them.
The mount articulates very nicely with two ball joints on either end and an elbow joint in the middle. The elbow joint has teeth to keep it locked in place and the ball jointed have a small grooved pattern machined into them to really lock things into place. The camera and lens on here weigh in at only about 1.5lbs, but I can tell you thing can hold a lot more weight than that if it needed to. Not just hold it either, but LOCKS it into place. Super impressed with this mount that I actually purchased a different model Arkon mount to complete my setup.
Images in this review
Reviewed in the United States on October 6, 2023
Style: MountVerified Purchase
I wouldn't have thought about this until I got it in my hands, and the product photos DO seem to reflect this, but: the mounting/post screw is kind of short.
I have two other mounts with the "camera mounting post", and those two are much longer than the one here. Now, normally I wouldn't be terribly concerned, but my plan is to mount a small and lightweight projector from it. Not sure why the screw has been made so short, the post's collar is intended to "shorten the screw" if necessary. (NOTE: In the picture, I have this product on top, facing down, so that the screw sizes can be compared. Both of the products have a rubber'ish washer around the post, so that's not the issue.)
Overall, the design seems good other than this flaw. The joints are tight when the screws are tightened and the joints are flexible when its time to arrange them. I also like that there are a variety of screw holes (and sizes) in the base mounting plate.
I have two other mounts with the "camera mounting post", and those two are much longer than the one here. Now, normally I wouldn't be terribly concerned, but my plan is to mount a small and lightweight projector from it. Not sure why the screw has been made so short, the post's collar is intended to "shorten the screw" if necessary. (NOTE: In the picture, I have this product on top, facing down, so that the screw sizes can be compared. Both of the products have a rubber'ish washer around the post, so that's not the issue.)
Overall, the design seems good other than this flaw. The joints are tight when the screws are tightened and the joints are flexible when its time to arrange them. I also like that there are a variety of screw holes (and sizes) in the base mounting plate.
Images in this review
Top reviews from other countries
Cliente do Kindle
Forte e estável
Reviewed in Brazil on January 17, 2023Style: MountVerified Purchase
Francisco Escobar
Brazo de buena calidad
Reviewed in Mexico on April 12, 2022Style: MountVerified Purchase
senzascusa
Excellent quality, very small
Reviewed in Canada on September 19, 2021Style: MountVerified Purchase
senzascusa
Reviewed in Canada on September 19, 2021
Images in this review
INGAF Aj
A really great addition for DSLR's
Reviewed in the United Kingdom on April 29, 2021Style: MountVerified Purchase
