I've put this on three doors, and it works really well, but you need to think a bit about what you're doing.
First off, if you haven't used any kind of v-strip before - it folds in half, into a V. There's self-stick stuff on one outer side of the V. You look at where a door or window is going to close, and stick it on such that when the door closes it will press against the pointy side, offering little resistance and pushing the V flat. When the door opens the material will spring out, at most into more of an L shape. Therefore the maximum width it can seal is half the width of the tape (and realistically a bit less). So if you see a 7/8 wide tape that seals 3/8 like this one, well, that's why.
The nice thing is that there's a fair amount of flex to it, and if you have an uneven gap it will do a pretty good job of filling it, since the door will push down as needed. It's quite thin, so if it starts binding you probably didn't need any weatherstripping anyway. It's much less frustrating than various foam or rubber solutions where you pretty much have to exactly match the width (although those probably provide more insulation if you can get them to work). I have a door that's badly wider at the bottom than the top so this is pretty much the only kind of product that's going to work.
The downside is that the first time you use it, you kind of have to puzzle out where to stick it pointing in what direction and the directions aren't that good. But if you just fold it so the stickem is on the outside and walk over to a door and hold it up and orient it so that the stickem sticks to something and the pointy side points towards the door you'll see how it has to go. It's not rocket science, but I can definitely see that if you didn't think about it and just started sticking it around you wouldn't be very happy with the results. If you don't want to be a "one star" person you can always cut off an inch and make sure you know how it all works before sticking the whole roll to the door.
| Manufacturer | M-D Building Products |
|---|---|
| Part Number | 03525 |
| Item Weight | 0.96 ounces |
| Product Dimensions | 1 x 5 x 6.5 inches |
| Country of Origin | China |
| Item model number | 3525 |
| Is Discontinued By Manufacturer | No |
| Size | 1 Count (Pack of 1) |
| Color | White |
| Material | Plastic |
| Item Package Quantity | 1 |
| Included Components | Painting Supplies;Abrasives & Surface Preparation;adhesive-caulk |
| Batteries Included? | No |
| Batteries Required? | No |
| Warranty Description | All M-D products are warranted to be free from defects in material and workmanship if installed and used in strict accordance with our installation instructions. Our liability is limited to our sale price of any products proved to be defective or, at our option, to the replacement of such products upon their return to us. |
